Vision Spinner 3
The Vision Spinner 3 is a slim, portable vape pen with a USB-C charging port and 1600mAh battery. Perfect for use with your favorite high-resistance tank or pre-filled cartridge, this battery works with any 510 threaded tank and coil over 0.8 ohms.
The authentic Vision Spinner 3 is designed with all your favorite features of a 510-threaded pen style device: slim form factor, variable voltage dial, and simple single-button functionality. The upgraded V Chip in the Spinner 3 adds several improvements over previous Spinner devices, including fast USB-C charging, a 0.8 ohm minimum resistance and the brand new 5W pre-heat button.
Looking for a simple, reliable device to use with coils over 1.0 ohm? The Vision Spinner 3 attaches easily to any 510-threaded tank and will fire coils between 0.8 ohms and 3.2 ohms. The single firing button can be used to activate your coil or will turn your Spinner 3 on and off with five clicks in under 1.5 seconds. The additional pre-heat button at the base of your Spinner 3 device will push 5W of power through your coil to warm up your eliquid and is ideal for preheating thicker eliquids before you take a vape.
To charge your Vision Spinner 3, just plug in the attached USB-C cord to your device and to a compatible wall adapter (no higher than 5V/2A). With an appropriate wall adapter the Spinner 3 can charge to full in as little as 90 minutes, though charging time will vary based on your adapter. With a 1600mAh built-in battery, the Spinner 3 can last all day with light to medium usage.
In addition to faster charging, the Spinner 3’s upgraded V Chip also outfits the device with several standard protections, including overcharge and short-circuit protections as well as an 8-second overheat protection that will cut off the device after 10 seconds of constant firing. The LED light on your battery will indicate low resistance and low voltage statuses as well as displaying your charge status.
Vision Spinner 3 Includes:
(1) Vision Spinner 3 Device
(1) USB-C Charger
(1) User Manual
Vision Spinner 3 Features:
- Updated V Chip
- 510 Threading to Tank
- Voltage Output from 3.2V - 4.8V
- 4 Power Level Output: 3.3V, 3.8V, 4.3V, 4.8V
- 0.8 ohm Minimum Resistance
- Bottom Dial for Voltage Settings
- 5-Click On/Off
- Single Firing Button
- Pre-heating Button (5W Output)
- 8 Second Overheat Protection with 10 Second Cutoff
- Overcharge Protection
- Short Circuit Protection
- LED Battery Life Indicator
- USB Type-C Charging Port
Vision Spinner 3 Specifications:
Size: 100mm x 19mm
Battery Capacity: 1600mAh
Output Voltage: 3.3V - 4.8V
Supported Resistance: 0.8 ohm - 3.2 ohm
Charging: USB-C Port
Wonâ€™t be buying again
Itâ€™s cute and smaller then the spinner 2 . I bought it for my husband and when it arrived it didnâ€™t work , it wonâ€™t charge and it was just complete waste of money
Big downgrade, bad craftsmanship.. Avoid this one.
Not sure what happened to the Vapros Vision line. Used to be a big supporter of the Spinner 2, then they switched up the packaging, build quality, and logo.. Not even sure it's a legit brand any longer. The older models used to proudly display the Vapros logo, now it is nowhere to be found and seems very cheaply made. To be more specific, the button is loose and shifts around just by tilting the device to the side. The threads on it do not feel like they support any of the 510 cartridges very well, and feels like it will break if you have in it your pocket and sit down. Definitely do not recommend.
Please Note: There is always risk involved when using rechargeable batteries at anytime and under any circumstances. Giant Vapes is not held responsible for any damage for any modification of the batteries, chargers, devices and other products that are sold on GiantVapes.com.
Giant Vapes will not be held liable for any injury, damage, or defect, permanent or temporary that may be caused by the improper use of a Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) nor any rechargeable battery/batteries as well as chargers. Please have a great understanding of the batteries/chargers you are using and how to care for them properly. You can see a list of our recommendations for proper handling of rechargeable batteries in our terms and conditions, located HERE.
When fworking with Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells, please be aware that they are very sensitive to charging characteristics and could possibly explode or burn if mishandled. Please make sure that you have knowledge on all rechargeable batteries before you use them. Always charge batteries on a clean and fire-proof surface. Never leave charging batteries unattended. If you see that there is visible damage to a battery, please do not use it. Be sure to always store and transport the rechargeable cells in a safe, non-conductive container. Giant Vapes offers non-conductive battery containers for storage and travel HERE.
Please dispose of battery cells, chargers or any other electronic devices in accordance with local laws and mandates.
There are many places that will dispose of batteries properly for you. Please refer to the website call2recycle.org. They provide a public drop-off location within 10 miles of more than 87% of people living in the U.S.